Audi MMI   MMI controls and displays   Phone pre-installation  Setting up
Centre armrest with mounting for mobile phone adapter
Fig. 1 Centre armrest with mounting for mobile phone adapter
Installing the adapter
Fig. 2 Installing the adapter
Removing mobile phone from adapter
Fig. 3 Removing mobile phone from adapter
Applies to vehicles: with phone pre-installation
The mobile phone adapter is fitted onto the mounting unit installed in the vehicle.
Installing the adapter
Fold the centre armrest -A- upwards Fig. 1.
Slide the lock on the adapter -2- Fig. 2 into the guide tab of the mounting unit -1-.
Push the bottom part of the adapter -2- down to make it engage.
Removing the adapter
Fold the centre armrest -A- upwards Fig. 1.
Take the mobile phone out of the adapter -B- Fig. 3.
Carefully pull the rear section of the adapter upwards out of the retainer.
Caution!
To avoid damaging the mobile phone adapter and the mounting unit, you should only remove the adapter when necessary.
Note
  • The adapter set you require depends on your type of mobile phone and may be different from the adapter version shown in the illustration.
  • To avoid malfunctions, ensure that the adapter unit is properly attached. The mobile phone must be properly engaged in the adapter.